The BAND-GEM detector represents one of the novel thermal neutron detection devices that have been developed in order to fulfil the needs of high intensity neutron sources that, like ESS (the European Spallation Source), will start operation in the next few years. The first version of this detector featured a detection efficiency of about 40% for neutrons with a wavelength of 4Å, a spatial resolution of about 6mm and a rate capability in the order of some MHz/cm 2 . The novelty of this device is represented by an improved 3D converter cathode (10 cm thick) based on 10 B 4 C-coated aluminum grids positioned in a controlled gas mixture volume put on top of a Triple GEM amplifying stage. The position where the neutron interacts in the converter depends on their energy and it was observed that the first version of the detector would suffer from an efficiency decrease for long (> 5 Å) neutron wavelength. This paper describes how the new 3D cathode allowed improving the detection efficiency at long neutron wavelengths while keeping all the benefits of the first BAND-GEM version.

Croci, G., Muraro, A., Perelli Cippo, E., Grosso, G., Hoglund, C., Hall-Wilton, R., et al. (2019). I-BAND-GEM: a new way for improving BAND-GEM efficiency to thermal and cold neutrons. THE EUROPEAN PHYSICAL JOURNAL PLUS, 134(4) [10.1140/epjp/i2019-12522-5].

I-BAND-GEM: a new way for improving BAND-GEM efficiency to thermal and cold neutrons

Croci G.
;
Muraro A.;Perelli Cippo E.;Rebai M.;Tardocchi M.;Gorini G.
2019

Abstract

The BAND-GEM detector represents one of the novel thermal neutron detection devices that have been developed in order to fulfil the needs of high intensity neutron sources that, like ESS (the European Spallation Source), will start operation in the next few years. The first version of this detector featured a detection efficiency of about 40% for neutrons with a wavelength of 4Å, a spatial resolution of about 6mm and a rate capability in the order of some MHz/cm 2 . The novelty of this device is represented by an improved 3D converter cathode (10 cm thick) based on 10 B 4 C-coated aluminum grids positioned in a controlled gas mixture volume put on top of a Triple GEM amplifying stage. The position where the neutron interacts in the converter depends on their energy and it was observed that the first version of the detector would suffer from an efficiency decrease for long (> 5 Å) neutron wavelength. This paper describes how the new 3D cathode allowed improving the detection efficiency at long neutron wavelengths while keeping all the benefits of the first BAND-GEM version.
Articolo in rivista - Articolo scientifico
GEM
English
2019
134
4
166
none
Croci, G., Muraro, A., Perelli Cippo, E., Grosso, G., Hoglund, C., Hall-Wilton, R., et al. (2019). I-BAND-GEM: a new way for improving BAND-GEM efficiency to thermal and cold neutrons. THE EUROPEAN PHYSICAL JOURNAL PLUS, 134(4) [10.1140/epjp/i2019-12522-5].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10281/286944
Citazioni
  • Scopus 6
  • ???jsp.display-item.citation.isi??? 7
Social impact