The surface modification of Inconel 600, Naval Brass and AISI 1018 carbon steel after immersion into the [C4mim][Tf2N] ionic liquid (IL) at 225°C for 20 days has been studied using SIMS, XPS and by surface topography measurements. The trace concentration of alloys' components in the IL solution after the immersion test was measured by inductively coupled plasma-optical emission spectroscopy (ICP-OES). Appreciable amounts of carbon, nitrogen, oxygen, sulphur and fluorine were detected on the surface of the alloys after the immersion test because of thermal decomposition of the IL. The corrosion layer formed onto the surface of Inconel was found to be rather thick (ca 400-500 nm) and rough (Ra ∝ 100-200 nm) due to the dominant adsorption of the IL decomposition products. At the same time, Inconel exhibited minor weight loss (2.5 × 10-5 g × cm-2) after the immersion test. On the contrary, for Brass, the thickness (70-100 nm) and roughness (Ra ∝ 80-100 nm) of the corrosion layer were the smallest among the alloys studied, and the weight loss was the greatest (1.3 × 10-2 g × cm-2). It is assumed that IL decomposition might be catalysed by some metallic atoms, for instance Ni, that, in turn, could slow down the surface corrosion and migration of metal atoms into the ionic liquid.

Bardi, U., Chenakin, S., Caporali, S., Lavacchi, A., Perissi, I., Tolstogouzov, A. (2006). Surface modification of industrial alloys induced by long-term interaction with an ionic liquid. In Special Issue:5th International Symposium on Atomic Level Characterizations for New Materials and Devices (ALC'05) (pp.1768-1772). WILEY [10.1002/sia.2500].

Surface modification of industrial alloys induced by long-term interaction with an ionic liquid

Perissi I.;
2006

Abstract

The surface modification of Inconel 600, Naval Brass and AISI 1018 carbon steel after immersion into the [C4mim][Tf2N] ionic liquid (IL) at 225°C for 20 days has been studied using SIMS, XPS and by surface topography measurements. The trace concentration of alloys' components in the IL solution after the immersion test was measured by inductively coupled plasma-optical emission spectroscopy (ICP-OES). Appreciable amounts of carbon, nitrogen, oxygen, sulphur and fluorine were detected on the surface of the alloys after the immersion test because of thermal decomposition of the IL. The corrosion layer formed onto the surface of Inconel was found to be rather thick (ca 400-500 nm) and rough (Ra ∝ 100-200 nm) due to the dominant adsorption of the IL decomposition products. At the same time, Inconel exhibited minor weight loss (2.5 × 10-5 g × cm-2) after the immersion test. On the contrary, for Brass, the thickness (70-100 nm) and roughness (Ra ∝ 80-100 nm) of the corrosion layer were the smallest among the alloys studied, and the weight loss was the greatest (1.3 × 10-2 g × cm-2). It is assumed that IL decomposition might be catalysed by some metallic atoms, for instance Ni, that, in turn, could slow down the surface corrosion and migration of metal atoms into the ionic liquid.
paper
Corrosion; Inductively coupled plasma-optical emission spectroscopy; Ionic liquid; metal alloy; Secondary ion mass spectrometry; X-ray photoelectron spectroscopy;
English
5th International Symposium on Atomic Level Characterizations for New Materials and Devices (ALC'05) - 4–9 dicembre 2005
2005
Special Issue:5th International Symposium on Atomic Level Characterizations for New Materials and Devices (ALC'05)
2006
38
12-13
1768
1772
reserved
Bardi, U., Chenakin, S., Caporali, S., Lavacchi, A., Perissi, I., Tolstogouzov, A. (2006). Surface modification of industrial alloys induced by long-term interaction with an ionic liquid. In Special Issue:5th International Symposium on Atomic Level Characterizations for New Materials and Devices (ALC'05) (pp.1768-1772). WILEY [10.1002/sia.2500].
File in questo prodotto:
File Dimensione Formato  
Bardi et al-2006-Surf. Interface Anal-VoR.pdf

Solo gestori archivio

Tipologia di allegato: Publisher’s Version (Version of Record, VoR)
Licenza: Tutti i diritti riservati
Dimensione 180.6 kB
Formato Adobe PDF
180.6 kB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10281/630451
Citazioni
  • Scopus 23
  • ???jsp.display-item.citation.isi??? 22
Social impact