Fast and low power SiPM amplifier operating in a wide temperature range

The next generation of Ring Imaging CHerenkov detectors in high energy physics experiments may use SiPMs as photon sensing elements. This upgrade is necessary to achieve greater detector granularity and speed, however SiPMs need to be cooled down to cryogenic temperatures to detect single photons in high-radiation environments and avoid being overwhelmed by the presence of “dark signals”. It is therefore necessary to study and characterize SiPM models in dedicated campaigns, using a custom-built amplifying chain that can also operate in an extended temperature range, between 80 K and 300 K, for detector characterization purposes. The proposed amplifier configuration consists of two amplifying stages and achieves low jitter values (<10−20psRMS) thanks to the low electronic noise and the high amplifier bandwidth. The circuit achieves a signal bandwidth of 500MHz<1GHz, a phase margin of approximately 45° and a power consumption of about 65−135mW. The amplifier prototype unit can be adjusted to cover the considered temperature range and still achieve low jitter values.