Sustainable adhesives: Exploring boronic ester vitrimers containing lignin microparticles

The market of epoxy resin-based adhesives is constantly growing in the automotive, electronics, and healthcare industries thanks to their unique features such as high bonding strength, durability, and corrosion resistance. In this work, alternative sustainable vitrimer adhesives, containing from 20 to 50 wt% of lignin microparticles, were prepared from epoxidized linseed oil (ELO) and a boronic ester dithiol crosslinker (DBEDT), in the absence of solvents and catalysts. The addition of unmodified commercial Kraft lignin to the composites directly influences their thermal and mechanical properties and determines their bonding capacity between several adherent substrates, also affecting the rewelding potential. The lignin-vitrimer composites and the corresponding neat vitrimer matrix exhibited values of lap shear strengths in the range of 9 to 17 MPa, when tested as adhesives with aluminum, stainless steel, and wood specimens, and good to excellent rewelding capability. The amount of lignin microparticles influences the balance between cohesive and adhesive forces during the separation of the adhered aluminum surfaces and the eventual joint failure. In the case of the composites with 20 wt% of lignin, lap shear strength remains constant even after four cycles of rebonding via compression molding, indicating that the best rewelding performance is associated with previous cohesive failure when the adhesive remains on both aluminum sheets' surfaces. In addition, the adhesion was preserved for 83 % of the initial value after 24 h immersed in water. Importantly, biodegradability in both soil and seawater was enhanced by the presence of the lignin filler. In summary, the simple preparation strategy of bio-based vitrimer composites coming from two natural sources could pave the way to green alternatives for industrial applications, such as epoxy-based adhesives.