I-MCP is an R&D project aimed at the exploitation of secondary emission of electrons from the surface of micro-channel plates (MCP) for single ionizing particles and fast timing of showers in high rate environments. Results from tests with electrons with energies up to 50 GeV of MCP devices with different characteristics are presented. In particular detection efficiency and time resolution are measured for a range of MCP prototypes: different MCP channel diameter and layers configuration are studied. Devices operated in I-MCP configuration, where the particle detection proceed through direct ionization of the MCP layers, are studied in comparison with the more usual PMT-MCP configuration. The results show efficiencies up to 70% for single charge particle detection for I-MCP devices with a time resolution of about 40 ps. The efficiency raise to 100% in response to high energy electromagnetic showers.
Barnyakov, A., Barnyakov, M., Brianza, L., Cavallari, F., Ciriolo, V., Del Re, D., et al. (2017). Beam test results on the detection of single particles and electromagnetic showers with microchannel plates. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH. SECTION A, ACCELERATORS, SPECTROMETERS, DETECTORS AND ASSOCIATED EQUIPMENT, 845, 471-474 [10.1016/j.nima.2016.05.101].
Beam test results on the detection of single particles and electromagnetic showers with microchannel plates
Brianza L.;Ciriolo V.;Ghezzi A.;Gotti C.;Govoni P.;Martelli A.;Marzocchi B.;Pigazzini S.
;Tabarelli de Fatis T.
2017
Abstract
I-MCP is an R&D project aimed at the exploitation of secondary emission of electrons from the surface of micro-channel plates (MCP) for single ionizing particles and fast timing of showers in high rate environments. Results from tests with electrons with energies up to 50 GeV of MCP devices with different characteristics are presented. In particular detection efficiency and time resolution are measured for a range of MCP prototypes: different MCP channel diameter and layers configuration are studied. Devices operated in I-MCP configuration, where the particle detection proceed through direct ionization of the MCP layers, are studied in comparison with the more usual PMT-MCP configuration. The results show efficiencies up to 70% for single charge particle detection for I-MCP devices with a time resolution of about 40 ps. The efficiency raise to 100% in response to high energy electromagnetic showers.
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
