Noise at the quantum limit over a broad bandwidth is a fundamental requirement for future cryogenic experiments for neutrino mass measurements, dark matter searches and Cosmic Microwave Background (CMB) measurements as well as for fast high-fidelity read-out of superconducting qubits. In the last years, Josephson Parametric Amplifiers (JPA) have demonstrated noise levels close to the quantum limit, but due to their narrow bandwidth, only few detectors or qubits per line can be read out in parallel. An alternative and innovative solution is based on superconducting parametric amplification exploiting the travelling-wave concept. Within the DARTWARS (Detector Array Readout with Travelling Wave AmplifieRS) project, we develop Kinetic Inductance Travelling-Wave Parametric Amplifiers (KI-TWPAs) for low temperature detectors and qubit read-out. KI-TWPAs are typically operated in a threewave mixing (3WM) mode and are characterised by a high gain, a high saturation power, a large amplification bandwidth and nearly quantum limited noise performance. The goal of the DARTWARS project is to optimise the KI-TWPA design, explore new materials, and investigate alternative fabrication processes in order to enhance the overall performance of the amplifier. In this contribution we present the advancements made by the DARTWARS collaboration to produce a working prototype of a KI-TWPA, from the fabrication to the characterisation.

Ahrens, F., Ferri, E., Avallone, G., Barone, C., Borghesi, M., Callegaro, L., et al. (2024). Development of KI-TWPAs for the DARTWARS project. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 34(3), 1-5 [10.1109/TASC.2024.3350602].

Development of KI-TWPAs for the DARTWARS project

Ferri E.;Borghesi M.;Faverzani M.;Giachero A.;Labranca D.;Moretti R.;Nucciotti A.;Origo L.;Zannoni M.
2024

Abstract

Noise at the quantum limit over a broad bandwidth is a fundamental requirement for future cryogenic experiments for neutrino mass measurements, dark matter searches and Cosmic Microwave Background (CMB) measurements as well as for fast high-fidelity read-out of superconducting qubits. In the last years, Josephson Parametric Amplifiers (JPA) have demonstrated noise levels close to the quantum limit, but due to their narrow bandwidth, only few detectors or qubits per line can be read out in parallel. An alternative and innovative solution is based on superconducting parametric amplification exploiting the travelling-wave concept. Within the DARTWARS (Detector Array Readout with Travelling Wave AmplifieRS) project, we develop Kinetic Inductance Travelling-Wave Parametric Amplifiers (KI-TWPAs) for low temperature detectors and qubit read-out. KI-TWPAs are typically operated in a threewave mixing (3WM) mode and are characterised by a high gain, a high saturation power, a large amplification bandwidth and nearly quantum limited noise performance. The goal of the DARTWARS project is to optimise the KI-TWPA design, explore new materials, and investigate alternative fabrication processes in order to enhance the overall performance of the amplifier. In this contribution we present the advancements made by the DARTWARS collaboration to produce a working prototype of a KI-TWPA, from the fabrication to the characterisation.
Articolo in rivista - Articolo scientifico
Bandwidth; Inductance; Kinetic theory; Photonic band gap; Resistance; Thickness measurement; Transmission line measurements;
English
11-gen-2024
2024
34
3
1
5
none
Ahrens, F., Ferri, E., Avallone, G., Barone, C., Borghesi, M., Callegaro, L., et al. (2024). Development of KI-TWPAs for the DARTWARS project. IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 34(3), 1-5 [10.1109/TASC.2024.3350602].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10281/458524
Citazioni
  • Scopus 0
  • ???jsp.display-item.citation.isi??? 0
Social impact