Thanks to their high detection efficiency and low intrinsic noise, direct conversion X-ray Photon Counting Detectors (XPCDs) are particularly suitable for low dose imaging applications such as mammography. The photon counting technology can implement also two or more acquisition thresholds to perform single-shot spectral imaging with one polychromatic source. However, XPCDs with thick high Z crystal sensor and small pixel size are affected by the charge sharing effect. This issue can induce multiple counts from a single interaction reducing both spectral and spatial resolutions. In a pure counting mode, multiple counts from charge sharing can be partially or totally removed by increasing the acquisition threshold at the cost of a loss of efficiency. Thus, the performances of XPCDs can be threshold-dependent. New generation XPCDs implement solutions to cope with charge sharing issue. If the charge sharing is properly corrected, no multiple counts are recorded and the performances (detection efficiency, spectral and spatial resolutions) of the acquisition system are expected to be independent from the acquisition threshold. This work presents a study of a Pixirad-1 detection system based on a CdTe Schottky sensor and PIXIE-III readout system. This chip can be configured in three different operation modes, two of which implement solutions to remove multiple counts. Using monochromatic radiation, the performances of these different operation modes have been compared trough a measure of the integral spectra and the Signal to Noise Ratio (SNR) as function of the acquisition threshold.

Di Trapani, V., Bravin, A., Brun, F., Dreossi, D., Longo, R., Mittone, A., et al. (2018). Characterization of noise and efficiency of the Pixirad-1/Pixie-III CdTe X-ray imaging detector. JOURNAL OF INSTRUMENTATION, 13(12) [10.1088/1748-0221/13/12/C12008].

Characterization of noise and efficiency of the Pixirad-1/Pixie-III CdTe X-ray imaging detector

Bravin A
Secondo
Membro del Collaboration Group
;
2018

Abstract

Thanks to their high detection efficiency and low intrinsic noise, direct conversion X-ray Photon Counting Detectors (XPCDs) are particularly suitable for low dose imaging applications such as mammography. The photon counting technology can implement also two or more acquisition thresholds to perform single-shot spectral imaging with one polychromatic source. However, XPCDs with thick high Z crystal sensor and small pixel size are affected by the charge sharing effect. This issue can induce multiple counts from a single interaction reducing both spectral and spatial resolutions. In a pure counting mode, multiple counts from charge sharing can be partially or totally removed by increasing the acquisition threshold at the cost of a loss of efficiency. Thus, the performances of XPCDs can be threshold-dependent. New generation XPCDs implement solutions to cope with charge sharing issue. If the charge sharing is properly corrected, no multiple counts are recorded and the performances (detection efficiency, spectral and spatial resolutions) of the acquisition system are expected to be independent from the acquisition threshold. This work presents a study of a Pixirad-1 detection system based on a CdTe Schottky sensor and PIXIE-III readout system. This chip can be configured in three different operation modes, two of which implement solutions to remove multiple counts. Using monochromatic radiation, the performances of these different operation modes have been compared trough a measure of the integral spectra and the Signal to Noise Ratio (SNR) as function of the acquisition threshold.
Articolo in rivista - Articolo scientifico
Hybrid detectors; Pixelated detectors and associated VLSI electronics; X-ray detectors;
English
Di Trapani, V., Bravin, A., Brun, F., Dreossi, D., Longo, R., Mittone, A., et al. (2018). Characterization of noise and efficiency of the Pixirad-1/Pixie-III CdTe X-ray imaging detector. JOURNAL OF INSTRUMENTATION, 13(12) [10.1088/1748-0221/13/12/C12008].
File in questo prodotto:
File Dimensione Formato  
Trapani_2018_J._Inst._13_C12008.pdf

Solo gestori archivio

Tipologia di allegato: Publisher’s Version (Version of Record, VoR)
Dimensione 1.07 MB
Formato Adobe PDF
1.07 MB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10281/345392
Citazioni
  • Scopus 10
  • ???jsp.display-item.citation.isi??? 7
Social impact