This paper investigates the use of organic polymer light emitting diodes (PLEDs) for the use in visible light communications (VLC). We prepared blue and green emitting PLEDs using commercial light-emitting polymers, and then characterised the device emission (spectrum and power), and extracted their circuit parameters for their electrical equivalent model for driving with small signals. In addition, we characterised the bandwidth (oldsymbol{B-{mod}}) of the devices over a period of continuous driving (∼ 4 h) and found that for the blue PLEDs the oldsymbol{B-{mod}} decreased from an initial 750 kHz to a steady state of ∼250 kHz. The green-emitting devices were found to benefit from an extended oldsymbol{B-{mod}} of ∼1.5 MHz at the beginning of the test, which then stabilised to ∼850 kHz. Furthermore, with the addition of a first order RC filter we show that, the steady state oldsymbol{B-{mod}} of the blue PLED cane be increased by a factor of ∼3, thus allowing > 1 Mbps non-return to zero on-off keying (NRZ OOK) data transmission in a complete VLC system.

Burton, A., Minotto, A., Haigh, P., Ghassemlooy, Z., Minh, H., Cacialli, F., et al. (2019). Optoelectronic Modelling, Circuit Design and Modulation for Polymer-Light Emitting Diodes for Visible Light Communication Systems. In 2019 26th International Conference on Telecommunications, ICT 2019 (pp.55-59). 345 E 47TH ST, NEW YORK, NY 10017 USA : Institute of Electrical and Electronics Engineers Inc. [10.1109/ICT.2019.8798790].

Optoelectronic Modelling, Circuit Design and Modulation for Polymer-Light Emitting Diodes for Visible Light Communication Systems

Minotto A.;
2019

Abstract

This paper investigates the use of organic polymer light emitting diodes (PLEDs) for the use in visible light communications (VLC). We prepared blue and green emitting PLEDs using commercial light-emitting polymers, and then characterised the device emission (spectrum and power), and extracted their circuit parameters for their electrical equivalent model for driving with small signals. In addition, we characterised the bandwidth (oldsymbol{B-{mod}}) of the devices over a period of continuous driving (∼ 4 h) and found that for the blue PLEDs the oldsymbol{B-{mod}} decreased from an initial 750 kHz to a steady state of ∼250 kHz. The green-emitting devices were found to benefit from an extended oldsymbol{B-{mod}} of ∼1.5 MHz at the beginning of the test, which then stabilised to ∼850 kHz. Furthermore, with the addition of a first order RC filter we show that, the steady state oldsymbol{B-{mod}} of the blue PLED cane be increased by a factor of ∼3, thus allowing > 1 Mbps non-return to zero on-off keying (NRZ OOK) data transmission in a complete VLC system.
slide + paper
circuit design; modelling; modulation; organic light-emitting didoes; visible light communications
English
26th International Conference on Telecommunications, ICT 2019
2019
2019 26th International Conference on Telecommunications, ICT 2019
978-1-7281-0273-3
2019
55
59
8798790
none
Burton, A., Minotto, A., Haigh, P., Ghassemlooy, Z., Minh, H., Cacialli, F., et al. (2019). Optoelectronic Modelling, Circuit Design and Modulation for Polymer-Light Emitting Diodes for Visible Light Communication Systems. In 2019 26th International Conference on Telecommunications, ICT 2019 (pp.55-59). 345 E 47TH ST, NEW YORK, NY 10017 USA : Institute of Electrical and Electronics Engineers Inc. [10.1109/ICT.2019.8798790].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10281/340921
Citazioni
  • Scopus 2
  • ???jsp.display-item.citation.isi??? 1
Social impact