A low-power high-linearity Variable-Gain-Amplifier, VGA, in a 0.13μm CMOS technology to be embedded in a multi-standard receiver (WLAN, UMTS, GSM, and Bluetooth) is reported. This multi-standard receiver architecture presents considerable different VGA requirements (in terms of bandwidth, DC-gain, and common mode input voltage) for the four telecom standards to be processed. Thus the proposed VGA, in addition to the power control, is demanded to accommodate the different standards requirements and feed the one channel filter. The prototype VGA features gain levels from -10dB to 36dB, with a 25dBm IIP3 and an input-referred noise voltage lower than 5nV/√Hz at 0dB DC-gain. This gives a 85dB-DR for the WLAN case. The VGA draws 6.4mA from a single 2.5V supply. © 2006 IEEE.

D'Amico, S., DE MATTEIS, M., Baschirotto, A. (2006). A 6.4mW, 4.9nV/√Hz, 24dBm IIP3 VGA for a multi-standard (WLAN, UMTS, GSM, and Bluetooth) receiver. In Solid-State Circuits Conference, 2006. ESSCIRC 2006. Proceedings of the 32nd European (pp.82-85) [10.1109/ESSCIR.2006.307536].

A 6.4mW, 4.9nV/√Hz, 24dBm IIP3 VGA for a multi-standard (WLAN, UMTS, GSM, and Bluetooth) receiver

DE MATTEIS, MARCELLO;BASCHIROTTO, ANDREA
2006

Abstract

A low-power high-linearity Variable-Gain-Amplifier, VGA, in a 0.13μm CMOS technology to be embedded in a multi-standard receiver (WLAN, UMTS, GSM, and Bluetooth) is reported. This multi-standard receiver architecture presents considerable different VGA requirements (in terms of bandwidth, DC-gain, and common mode input voltage) for the four telecom standards to be processed. Thus the proposed VGA, in addition to the power control, is demanded to accommodate the different standards requirements and feed the one channel filter. The prototype VGA features gain levels from -10dB to 36dB, with a 25dBm IIP3 and an input-referred noise voltage lower than 5nV/√Hz at 0dB DC-gain. This gives a 85dB-DR for the WLAN case. The VGA draws 6.4mA from a single 2.5V supply. © 2006 IEEE.
paper
-10 to 36 dB;0.13 micron;2.5 V;6.4 mA;6.4 mW;Bluetooth;CMOS technology;GSM;IIP3 VGA;UMTS;WLAN;input-referred noise voltage;low-power high-linearity variable-gain-amplifier;multistandard receiver;one channel filter;power control;3G mobile communication;Bluetooth;CMOS integrated circuits;cellular radio;low noise amplifiers;radio receivers;wireless LAN;
English
ESSCIRC 2006 - 32nd European Solid-State Circuits Conference
2006
Solid-State Circuits Conference, 2006. ESSCIRC 2006. Proceedings of the 32nd European
9781424403028
2006
82
85
4099709
none
D'Amico, S., DE MATTEIS, M., Baschirotto, A. (2006). A 6.4mW, 4.9nV/√Hz, 24dBm IIP3 VGA for a multi-standard (WLAN, UMTS, GSM, and Bluetooth) receiver. In Solid-State Circuits Conference, 2006. ESSCIRC 2006. Proceedings of the 32nd European (pp.82-85) [10.1109/ESSCIR.2006.307536].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10281/31491
Citazioni
  • Scopus 27
  • ???jsp.display-item.citation.isi??? ND
Social impact