Digital audio sensors have been used in microphone-embedded portable electronics. This paper shows a mixed-signal adaptive readout ASIC for digital audio sensor, which includes a programmable-gain-amplifier, a switched-capacitor sigma-delta modulator, digital signal processing, and power management circuits. The digital part comprises a digital low-pass filter, a digital-gain-compensation and a digital automatic-gain-controller. The clear advantage of this system is to obtain high signal-to-noise ratio (SNR) and wide input range simultaneously. In addition, both a normal operation mode and a sleep mode are realized to address a flexible current budget. The ASIC is fabricated in a 0.18-um CMOS process. Experimental results show the expected adaptive readout function over the input range from 94 to 136 dB SPL. In the normal mode, a system SNR of 68 dB (A-weighted) at 1 kHz 94 dB SPL input is achieved under 600 uA. Further, an impressive acoustic overload point (AOP) of 136 dB SPL is guaranteed. In the standby condition, the sleep mode with current less than 20 uA is obtained, so that the battery life can be extended. Compared to other existing solutions, this adaptive readout ASIC shows the best combination of achievable SNR, AOP and current budget for digital audio sensors.

Zou, L., Rocca, G., De Blasi, M., Grassi, M., Malcovati, P., Baschirotto, A. (2017). Sigma-delta ADC based adaptive readout ASIC for digital audio sensor. ANALOG INTEGRATED CIRCUITS AND SIGNAL PROCESSING, 92(3), 383-392 [10.1007/s10470-017-1002-7].

Sigma-delta ADC based adaptive readout ASIC for digital audio sensor

De Blasi, M;Baschirotto, A
2017

Abstract

Digital audio sensors have been used in microphone-embedded portable electronics. This paper shows a mixed-signal adaptive readout ASIC for digital audio sensor, which includes a programmable-gain-amplifier, a switched-capacitor sigma-delta modulator, digital signal processing, and power management circuits. The digital part comprises a digital low-pass filter, a digital-gain-compensation and a digital automatic-gain-controller. The clear advantage of this system is to obtain high signal-to-noise ratio (SNR) and wide input range simultaneously. In addition, both a normal operation mode and a sleep mode are realized to address a flexible current budget. The ASIC is fabricated in a 0.18-um CMOS process. Experimental results show the expected adaptive readout function over the input range from 94 to 136 dB SPL. In the normal mode, a system SNR of 68 dB (A-weighted) at 1 kHz 94 dB SPL input is achieved under 600 uA. Further, an impressive acoustic overload point (AOP) of 136 dB SPL is guaranteed. In the standby condition, the sleep mode with current less than 20 uA is obtained, so that the battery life can be extended. Compared to other existing solutions, this adaptive readout ASIC shows the best combination of achievable SNR, AOP and current budget for digital audio sensors.
Articolo in rivista - Articolo scientifico
Adaptive; AGC; Audio sensor; PGA; Sigma-delta; Signal Processing; Hardware and Architecture; Surfaces, Coatings and Films
English
2017
92
3
383
392
none
Zou, L., Rocca, G., De Blasi, M., Grassi, M., Malcovati, P., Baschirotto, A. (2017). Sigma-delta ADC based adaptive readout ASIC for digital audio sensor. ANALOG INTEGRATED CIRCUITS AND SIGNAL PROCESSING, 92(3), 383-392 [10.1007/s10470-017-1002-7].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10281/191742
Citazioni
  • Scopus 5
  • ???jsp.display-item.citation.isi??? 3
Social impact