The behaviour of a pinhole type sensor for the determination of humidity (1000-28 000 ppm of water vapour, corresponding to about 3.5 to 90 RH% at 25 degrees C) in N-2 and in N-2/O gas mixtures is presented. The operating temperature of the sensor, consisting of a zirconia-based electrochemical cell with a diameter and a thickness of 10 and 5 mm, is 500 degrees C. Imposing a ser of potential (from 0 to 1400 mV) to the electrodes, typical polarographic curves were observed, in the presence of two electroactive species two limiting curves were obtained. Water vapour concentration can be obtained with an error not exceeding +/-4%. (C) 1999 Elsevier Science B.V. All rights reserved
Mari, C., Rabotti, G. (1999). Humidity determination by solid state limiting current sensor. SOLID STATE IONICS, 124(3-4), 309-315 [10.1016/S0167-2738(99)00223-4].
Humidity determination by solid state limiting current sensor
MARI, CLAUDIO MARIA;
1999
Abstract
The behaviour of a pinhole type sensor for the determination of humidity (1000-28 000 ppm of water vapour, corresponding to about 3.5 to 90 RH% at 25 degrees C) in N-2 and in N-2/O gas mixtures is presented. The operating temperature of the sensor, consisting of a zirconia-based electrochemical cell with a diameter and a thickness of 10 and 5 mm, is 500 degrees C. Imposing a ser of potential (from 0 to 1400 mV) to the electrodes, typical polarographic curves were observed, in the presence of two electroactive species two limiting curves were obtained. Water vapour concentration can be obtained with an error not exceeding +/-4%. (C) 1999 Elsevier Science B.V. All rights reserved
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
