SiO2 ultrathin and thin films have been deposited on single-crystal Si substrates by means of nonreactive radio frequency magnetron sputtering. The temperature of the substrate and the deposition times have been varied in the range of 200-500 degrees C and 60-14 400 s, respectively. The average deposition rate has a range of 0.5-5 nm/min and tends to decrease with the increase of the substrate temperature. Two different growth regimes may be observed for ultrathin and thin films, the transition taking place in the range of 5-10 nm depending on the substrate temperature. The roughness of the film surface and the grain dimensions do increase with the substrate temperature for short deposition times (t <= 300 s), whereas their behavior is less defined for intermediate ones (300 s < t < 1800 s). Finally, for long deposition times (t > 1800 s) the roughness increases again with T, and its slope is higher, the higher the substrate temperature is

Quartarone, E., Mustarelli, P., Grandi, S., Marabelli, F., Bontempi, E. (2007). Effects of the deposition parameters on the growth of ultrathin and thin SiO2 films. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY. A. VACUUM, SURFACES, AND FILMS, 25(3), 485-491 [10.1116/1.2714958].

Effects of the deposition parameters on the growth of ultrathin and thin SiO2 films

Mustarelli, P;
2007

Abstract

SiO2 ultrathin and thin films have been deposited on single-crystal Si substrates by means of nonreactive radio frequency magnetron sputtering. The temperature of the substrate and the deposition times have been varied in the range of 200-500 degrees C and 60-14 400 s, respectively. The average deposition rate has a range of 0.5-5 nm/min and tends to decrease with the increase of the substrate temperature. Two different growth regimes may be observed for ultrathin and thin films, the transition taking place in the range of 5-10 nm depending on the substrate temperature. The roughness of the film surface and the grain dimensions do increase with the substrate temperature for short deposition times (t <= 300 s), whereas their behavior is less defined for intermediate ones (300 s < t < 1800 s). Finally, for long deposition times (t > 1800 s) the roughness increases again with T, and its slope is higher, the higher the substrate temperature is
Articolo in rivista - Articolo scientifico
SiO2, thin films
English
2007
25
3
485
491
none
Quartarone, E., Mustarelli, P., Grandi, S., Marabelli, F., Bontempi, E. (2007). Effects of the deposition parameters on the growth of ultrathin and thin SiO2 films. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY. A. VACUUM, SURFACES, AND FILMS, 25(3), 485-491 [10.1116/1.2714958].
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10281/257078
Citazioni
  • Scopus ND
  • ???jsp.display-item.citation.isi??? 7
Social impact